Home > Products > Detail Products

Pellet Cooler
   Pellet cooler is mainly used for cooling of pellet feed in the feed pelleting section. It cools the pellet feed coming from pellet mill and with a temperature of 70°C~90°C to a temperature 3°C~5°C slightly higher than ambient temperature, and is capable of lowering to a safety moisture content. The cooled pellets not only improves in hardness but also can prevent from going mouldy, which facilitates the transportation and storage of pellet feed.


 

Model

BKLN1.2

BKLN1.5

BKLN2.5

BKLN4

BKLN6

Output (t/h)

0.8-1.2

1.2-2

2-4

4-6

5-8

Capacity (L)

1.2

1.5

2.5

4

6

Cooling Time

No less than 10 minutes

Cooled Temperature ()

Room temperature + 3-5

Power (KW)

0.18

0.25

0.25

0.37

0.37

Volume of Indraught (m3/h)

5000

9000

13500

18000

27000

Wind Pressure

Higher than 200mm H2O

Fan Model Type

4-72-11-4A

4-72-11-5A

4-72-11-5A

4-72-11-6C

4-72-11-8C

Fan Power (KW)

5.5

7.5

11

18.5

22

Air-lock

BFGFZ9

BFGFZ9

BFGFZ9

BFGFZ16

BFGFZ25

Machine Dimension ((L*W*H) (mm)

1570x1200x2470

1556x1616x2505

2100x1966x2870

2300x2150x3190

3315x2146x3722

   1). BSM pellet cooler is the latest cooling equipment that contains international advanced cooling technology, the machine is mainly used for cooling finished pellets with high temperature.

  2). BSM pellet cooler has the special cooling theory ,the cool air and pellet move inversely.

  The pellets are cooled from bottom to the top gradually ,which avoid the split of pellet surface, the heart moisture and heat emanate uneasily during the cooling process and so on characteristic by using old type vertical cooler .

  3).The poultry feed pellet cooler adopts vibration locking device, increasing the cooling efficiency, reducing the breaking rate, rooting out the drawback that the cooler can not work after the pellets become cooler, at the same time, lowering the power consumption.

  4).The temperature of pellets after cooling is not +5 °C higher than room temperature.

  5).The reducing moisture rate is not lower than 3.8%. All these are good for producing high capacity feed pellets, lengthening pellets storage period and improving economic efficiency.

  6).BSM pellet cooler has lots of advantages like high capacity, good cooling efficiency,

  high level automatic, low noise, less maintenance and convenient in operation.


   BSM Pellet Cooler Structure and Characteristics

  1).Counter-flow Cooling System: counter flow Cooler cools the pellets with high temperature and high humidity by using the principle of counter flow cooling, avoiding that cool air directly meets hot pellets to make pellets cool rapidly with a result of crack of pellet surface.

  2). Airlock is used for feeding: air-in area is large, so the cooling effect is remarkable.

  3). The top of cooler is made of stainless steel, resulting in high corrosion-resistance and long service life.

  4).Slide reciprocating discharger has smooth and reliable discharging.

  5).Suitable for cooling of any granular products.

Online message

Note: For product inquiry or order requirements, Fill in the demand for relevant staff to contact you quickly!

Your Name: *
Your Phone: *
Your Email: *
Your Country:
Your Message:
    

Home        |         About us        |         News        |         Products        |         Cases        |         Order        |         Contact us